Hydro International Hydro-Logic Flexi Logger 300Ex, Руководство пользователя

Страница: 14 / 74

Hydro-Logic
®
Flexi Logger 300Ex
User Manual
22 August 2018 Page 14 of 74
Getting started
These instructions assume
•
You are unfamiliar with the Hydro-Logic
®
Flexi Logger 300Ex
•
You have purchased the logger with a Timeview data collection and
configuration package, including SIM
•
You have ordered the logger with a sensor
•
You have ordered the Pre-wiring and configuration service
The instructions cover the most important aspects of logger operation . They
should be carried out before the logger is installed on site .
Powering the logger
The logger is shipped in the OFF state. To power it, you must open the
enclosure and plug in the HLC module.
Once you do this, you should see a green flash on the LED
The logger is now ON. You should see a blue LED flash every two seconds.
There are other patterns of LED activity, which are described in
Status LED flash
patterns .
You can power-down the logger by removing the HLC module.