Hydro-Flux FlowBright, Инструкция по эксплуатации

Страница: 8 / 16

P a g e | 8
Installation
Pre-installation Steps
1. Before installation, please read the instructions carefully. Incorrect
installation will void the guarantee.
2. Remove FlowBright from packaging.
3. Inspect to see if any damage has occurred during transit. If any damage
is found, please contact your supplier.
4. Turn off your filtration system.
Installation Steps
1. Remove the current eyeball trim from the return inlet. You need to be
able to access the 1.5-inch female threads on your designated installation
return inlet.
2. Referring to the Flow Determination section below, configure your
FlowBright and/or filter return system to the optimal setting.
3. Before screwing FlowBright into your return inlet, check which adaptor
you require. Short Adaptor Attached as standard. If an adaptor change is
necessary, refer to the adaptor adjustment section below.
4. Screw FlowBright into your return inlet.
5. Turn your filtration system back on.
6. Your FlowBright should now be functional. Use remote control as
needed.
Installation Diagram