Hydro-Flux FlowBright, Инструкция по эксплуатации

Страница: 13 / 16

P a g e | 13
Frequently Asked Questions
What happens when I backwash my pool?
The light will not function when filter flow stops at the inlet. After
backwashing the light can be switched back on if required.
Will the light operate when I’m vacuuming my pool?
The light will operate if there is adequate water flow into the light
assembly. When vacuuming through the filter, dirt will progressively
build up within the filter, reducing the water flow to the light
assembly. (Note; When the pump is turned off to adjust the multiport
valve at the filter, the flow will momentarily stop, causing the light to
turn off).
Can I use FlowBright in a salt pool?
FlowBright is constructed out of the highest quality plastics and 316L
stainless steel components. These materials generally have a high
resistance to corrosion under normal chlorinated pool water
conditions. With the addition of a salt/chlorine generator, the
aggressiveness of the water to metallic components significantly
increases; therefore, the risk of corrosion and subsequent damage
and/or failure of these components also increases. If salt/chlorine
levels are kept to a minimum, acceptable level of corrosion may occur.
If high levels or runaway levels of salt and or chlorine are present,
severe damage may occur.