background image

P a g e

 | 

 
Warning – Do not attach to any suction ports such as vacuum ports. This 
product is not designed to utilize water suction ports and will cause damage to 
the assembly of the product, voiding the warranty.  

Warning –This product is designed to only be used in conjunction with filtered 
water. If unfiltered water is used to power the generator, damage will be 
caused to the lighting assembly, voiding the warranty.  

Warning – The turbine assembly contains very strong magnets; subsequently, 
the light should not be disassembled by unskilled persons. Strong magnetic 
fields can be harmful to people with sensitive electronic medical devices, such 
as pace makers. When the light is fully assembled all the magnets are fully 
screened, eliminating any potential hazard.  

Warning – When installing FlowBright do not let the distance between the 
back of the fascia and the wall of the pool become larger than 8mm.  

FlowBright is suitable to operate for depths of up to 1 metre.  

SAVE THESE INSTRUCTIONS 

Box Contains: 

1 x FlowBright Light 

1 x Long Adaptor 

1 x Short Adaptor 

1 x Remote Control 

1 x Instruction Manual 

1 x Warranty Information 

1 x Warranty Card  

 

Tools Needed for Installation: 

1 x Pozi drive screwdriver  

Содержание FlowBright

















Отзывы: