Hydro-Flux FlowBright, Инструкция по эксплуатации

Страница: 12 / 16

P a g e | 12
4. Recheck gate setting as they may have adjusted during
repositioning of adaptor fixing plate.
Maintenance
As FlowBright is constructed and installed in a simply and easy to understand
way, maintaining it is also straightforward. We recommend that you remove
the light from your inlet once every six months. Have a look over the product
to make sure that no faults have occurred, remove any potential debris from
the housing, cleaning any residue that may have formed. Once you’ve done
this, simply reattached the product.
Pool Chemistry
To keep your FlowBright functioning properly, correct pool chemistry and
water maintenance is essential. Water temperature should be not fall below
10° degrees centigrade or go beyond 40° degrees centigrade. pH should be in
the range of 7.2 – 7.6, and should never fall below 7.0, as this may cause
issues with the materials used to construct the product. Alkalinity should be
between 80-120, while calcium hardness should be 200-400 at a minimum.
Chlorine needs to be no more than 2ppm. If you cannot guarantee these
conditions, please contact your pool specialist. If you do install FlowBright in
an environment that does not meet these requirements, your warranty may be
void.