Configuring the SMU
SensorMonitoring Unit - SMU
en(us)
Page 67 / 100
BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20
2013-08-20
ED.MPNT – Change the name of measurement points
Under ED.MPNT you can modify the designation of the measurement point
to meet your requirements.
You only have 6 characters available for the name. E.g., TEST01, DIGGER,
CRANE, etc.
If the setting RING (factory setting) is selected in the PowerUp
menu under the item REC.MOD, then only MPNT00 is available.
No other measurement points can be selected in this operating
mode.
Use the following buttons:
Change to the next
option in the menu
o.k.
To confirm the change
Esc
Cancel and back
EdMPNT
Use the following buttons:
Change to the next
measurement point
o.k.
To confirm the change
Esc
Cancel and back
MPNT00
0
Use the following buttons:
Select another
character
Change the current
character
o.k.
To confirm the change
Esc
Cancel and back
MPNT00
0
The following characters will appear when the
button is pressed,
wrapping around at the end.
ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789_
The empty space is located between 9 and A and can be adjusted only from
the 6th position to the left. This offers you the option to enter measurement
point names with less than 6 characters.
