OLF-5 Series
Changing the Filter Element - Toploader
HYDAC FILTER SYSTEMS GMBH
en
Page 31 / 52
BeWa OLF5_Serie 3433222b en-us 2011-11-14.doc
2011-11-14
9.
Fasten the dirt catch tray to the bottom end
of the filter element.
10. Place the filter element with the cover and
dirt catch tray in the filter housing.
Observe correct placement of the O-ring on
the cover while doing so.
11. Secure the cover with the housing clamp.
The tightening torque is a maximum of 5
Nm.
12. Tighten the drain plug (Drain) on the
connection part of the unit.
Switch the filtration unit on.
Bleed the filter housing through the air bleed
screw (Air Bleed) in the filter cover.