Operation and Maintenance Instruction
General Safety Precautions
HYDAC Filtertechnik GmbH
en
Page 35
BEWA OLF15-60 10bar 3255361-01a en.doc
2005-08-25
1.2.1 Basic Symbols
This symbol denotes safety precautions, the non-observance of which can
endanger persons and the environment.
This symbol denotes safety precautions, the non-observance of which can
endanger persons by electrical voltage.
This symbol marks an important note for the proper use of the unit /
software. The non-observance of these notes can lead to damage or
failure of the unit / software.
This symbol is followed by user tips and particularly useful information.
1.3 Proper / Designated Use
The OLF is a stationary filter unit used for filtering oil.
Any use deviating from what is specified herein shall constitute improper use.
The manufacturer will assume no liability for any loss or damage as the result thereof.
Proper or designated use of the OLF extends to the following:
•
Maintaining adherence to all the instructions contained herein.
•
Performing requisite inspection and maintenance work.
1.4 Improper Use
Any use deviating from the proper/designated use described above is prohibited.
Improper use may result in hazard to life and limb.
1.5 Safety Devices
Prior to starting up the filter unit each time, make sure that all the protective safety devices
are properly installed and are in proper working order.
1.6 Informal Safety Precautions
Make sure to always keep the operating instructions in the vicinity of the unit.
Apart from the operating instructions, any and all general and local regulations pertaining to
accident prevention and environmental protection are to be made available and observance
to be maintained to them.
Make sure to keep the safety and hazard symbols and warnings on the unit in a legible
condition.
