Transporting the module
CTM-EF 1x3x Series
en
Page 17 / 52
BeWa CTM-EF 1x3x 4365310 en-us 2018-06-06.docx
2018-06-06
Transporting the module
The module is shipped from the factory in a wooden box with the
corresponding securing devices. Pack the assembly for further transport in
this wooden box. Alternatively, place the assembly on a pallet of sufficient
size using a forklift. Brace the assembly so that the steering rollers are not
loaded and secure the module against tipping.
When receiving and unpacking the unit, check it for damage in transit. Report
any damage to the respective forwarding agent immediately.
The module can be moved by pushing it on its casters. You can also use
hoisting equipment (e.g. a fork lift truck) to transport the module, provided its
load-carrying capacity is greater than the weight of the empty module.
To transport the module, all test liquid reservoirs and filter holders must be
drained.
Storing the module
Disconnect the connection cable and hoses from the connected modules.
Drain the unit completely.
Store the completely emptied module in a clean, dry room with the following
conditions:
Permitted storage
temperature range:
See chapter "Technical Data", page 42.
Humidity:
max. 80 % (non-condensing)
Air:
dust-free, not salty air, not in the vicinity of
oxidizing substances (flash rust, rust bloom)
