Whirlpool WHAROS5 User Manual Download

Page: 1 / 27

Manufactured and warranted by

Ecodyne Water Systems

1890 Woodlane Drive

Woodbury, MN 55125

How to install, operate

and maintain your

Reverse Osmosis

Water Filtration System

Model WHAROS5

tio

n a

tio

n M

201-8402684 (Rev 02 3/18/16)

Do not return unit to store

If you have any questions or concerns when

installing, operating or maintaining your water

filtration system, call our toll free number:

1-866-986-3223

Monday- Friday, 7 AM - 6 PM CST or visit

whirlpoolwatersolutions.com

When you call, please be prepared to provide

the model number and date code of your

product, found on the rating decal on back.

System tested and certified by NSF International

against NSF/ANSI Standard 42 for the reduction

of chlorine taste and odor, and Standard 58

for the reduction of arsenic, barium, cadmium,

chromium (hexavalent), chromium (trivalent),

copper, cysts, lead, nitrate (as N), nitrite (as N),

radium 226/228, selenium, turbidity and TDS.

Summary of Contents for WHAROS5




























Search results

Summary of Contents for WHAROS5

Reviews:

Related manuals for WHAROS5

Brands by name

Popular brands

Whirlpool WHAROS5, User Manual

Search results

Summary of Contents for WHAROS5

Reviews:

Related manuals for WHAROS5

Brands by name

Popular brands