HYDAC FILTER SYSTEMS OXiStop OXS, Инструкция по установке и обслуживанию

Страница: 44 / 108

Starting up the unit
OXiStop OXS
en
Page 44 / 108
MoWa OXS 3992763e en-us 2018-08-10.docx 2018-08-10
Starting up the unit
After you have connected the unit and the components hydraulically and
electrically as described in the relevant chapters, start up the unit as follows:
1. Check that a suitable filter element is installed in all filter housings.
2. Fill and bleed the unit with oil as described in the chapter "Filling the
hydraulic tank with oil (first filling/oil change)" on page 50.
3. Check all the settings of the sensors/indicators – see:
- Checking/setting the electronic pressure switch (EDS), see page 75
for details.
- Check / adjust electronic level / temperature sensor HNS, see page
77 for details.
4. Switch on the unit's components.
Switching off the unit
To switch off the unit, switch off all of the components such as the OLF 5
bypass flow filtration unit, sensor, etc. or disconnect the electricity to them.