HYDAC FILTER SYSTEMS OXiStop OXS Скачать руководство пользователя страница 12

Страница: 12 / 108

Safety Information

OXiStop OXS

Page 12 / 108

MoWa OXS 3992763e en-us 2018-08-10.docx

2018-08-10

Improper Use or Use Deviating from Intended Use

DANGER

Danger due to unanticipated use of the unit

Bodily injury and damage to property will result
when operated improperly.

►

Never operate the unit in potentially explosive
atmospheres.

►

The unit is only to be used with permissible
media.

Any use extending beyond this or deviating therefrom shall not be considered
intended use. HYDAC Filter Systems GmbH will assume no liability for any
damage resulting from such use. The user alone, shall assume any and all
associated risk.

Improper use or use deviating from intended may result in hazards and/or will
damage the unit. Examples of improper use:

•

Operation in potentially explosive atmospheres.

•

Operation with a non-approved medium.

•

Operation under non-approved operational conditions.

•

Operation when the safety devices are defective.

•

Modifications to the power unit made by the user or purchaser.

•

Inadequate monitoring of parts that are subject to wear and tear.

•

Improperly performed repair work.

Содержание OXiStop OXS













































































































Результаты поиска

Содержание OXiStop OXS

Отзывы:

Похожие инструкции для OXiStop OXS

Бренды по названию

Популярные бренды

HYDAC FILTER SYSTEMS OXiStop OXS, Инструкция по установке и обслуживанию

Результаты поиска

Содержание OXiStop OXS

Отзывы:

Похожие инструкции для OXiStop OXS

Бренды по названию

Популярные бренды