HYDAC ELECTRONIC HPT 500 Series, Руководство по эксплуатации

Страница: 32 / 36

14
HPT 500 IO-Link
Edition: 2020-04-08
HYDAC ELECTRONIC GMBH
Part no.: 670038
11 Technical details
Input data
Measuring ranges Differential pressure 2; 5; 8 bar
Version: Aluminum Stainless steel
Pressure resistance 160 bar 420 bar
Overload pressure 200 bar 600 bar
Burst pressure 350 bar 1600 bar
Mechanical connection G ½ HN 28-22
Tightening torque, recommended 33 Nm 100 Nm
Parts in contact with fluid 1) Connector: Aluminum Stainless steel
Seals:
O-ring FKM
(standard)
Profile seal ring FKM PTFE
Fluid compatibility Hydraulic oils: H, HL, HLP, HVLP, HLPD to DIN 51524 rapidly
biodegradable operating fluids to VDMA 24568 (HETG, HEES,
HEPG)
Viscosity range max. 250 cSt
Output data
Output signal IO-Link interface
Accuracy acc. to DIN 16086, 2) Max.
setting
≤ ± 3 % FS typ.
≤ ± 5 % FS max. (bez. auf ∆ p)
Temperature compensation ≤ ± 0.05 % FS / °C max. offset
≤ ± 0.05 % FS / °C max. range
Long-term drift ≤ ± 0.5 % FS typ. / year
Environmental Conditions
Compensated temperature range +20 °C .. +70 °C
Operating temperature range -20 °C .. +85 °C
Storage temperature range -40 °C .. +100 °C
Fluid temperature range -20 °C .. +85 °C
marked EN 61000-6-1 / 2 / 3 / 4
Vibration resistance acc. to
DIN EN 60068-2-6 at 10 .. 500 Hz ≤ 20g
Shock resistance acc. to
DIN EN 60068-2-29 (1 ms) ≤ 50 g
Protection class 3) acc. DIN EN 60529 IP 67 (male M12x1)
IO-Link-specific data
IO-Link revision V1.1
Transmission Rate, Baud rate 38.4 kbit/s (COM2)
Minimum Cycle Time 2.5 ms
Process data width 16 bit
SIO Mode Supported Yes
Sensor profile GPS
M-sequence capability PREOPERATE = TYPE_1_V (8 Byte) OPERATE = TYPE_2_2
ISDU supported
Download the IO Device Description
(IODD) from: https://ioddfinder.io-link.com/#/
Other data
Supply voltage Supply voltage 9 .. 35 V DC (18 .. 30 V DC for communication
operation)
Residual ripple of supply voltage ≤ 5 %
Current consumption ≤ 25 mA
Life expectancy > 1 Milllion cycles (max. diff. Pressure resistance)
Weight ~ 80 g (Aluminum)
~ 170 g (Stainless steel)
Note: Reverse polarity protection of the supply voltage, overvoltage, override and and short circuit protection are provided.
FS
(
F
ull
S
cale) = relative to complete measuring range
1) Other seal materials on request
2) The accuracy is valid if the transmitter is installed inside of a steel or a stainless steel block.
3) With mounted mating connector in corresponding protection class