10
HPT
500
IO-Link
Edition: 2020-04-08
HYDAC ELECTRONIC GMBH
Part no.: 670038
10.1 Parameterisation by means of the IO-Link Master
The pressure sensor can be parameterised via the IO-Link interface by means of any IO-Link
compatible master configuration tool (according IO specifications V1.1).
10.2 Parameterisation by means of HYDAC programming adapter ZBE P1-000
(Connection via standard cable)
Sensor
1
ZBE P1
2
3
4
1
2
3
4
L+
L-
USB
PC
Q1
10.3 Parameterisation by means of HYDAC portable measuring unit HMG 4000
Connection via standard cable to an IO-Link female connector; detailed information can be
taken from the HMG 4000 operation manual.
10.4 Adjustable parameters
(read write)
Interlock avoiding unauthorized device access (Index 12)
o
Parameter
(write)
access (Subindex 1):
Unlocked (False)
Locked (True)
o
Data retention (Subindex 2)
User-specific mark (Index 24)
Function-specific mark (Index 25)
Site specific mark (Index 26)
Parameter SSC1 (Index 60) and SSC2 (Index 62):
Configuration of SSC1 (Index 61) and SSC2 (Index 63)
,
each
o
Logic (Subindex 1): switching logic: Default: High active
- If "High Active":
SSC = 0: OFF
SSC = 1: ON
- If "Low Active":
SSC = 0: ON
SSC = 1: OFF
Data retention (Subindex 2) is available for compatibility reasons and
should always be set to "false" in order to prevent from unexpected
behaviour when storing data between the master and the device.
