HYDAC ELECTRONIC CMU 1000, Руководство пользователя

Страница: 71 / 126

Condition Monitoring Unit CMU 1000 Page 71
V03 R21 - 2020/07/09 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
6.1 Menu Bar
The menu bar of the CM Editor is tailored to the MS Windows user interface and
contains the following menu structure:
6.1.1 File

With " New ", you can establish for which platform (CM device) the CM program
is to be created before beginning the actual creation of the CM program. The
program functions which are not available for the selected platform will be
suppressed in gray tones in the
Functions
window and will not be able to be
used during the program generation.

With " Platform ", you can establish for which platform (CM device) the CM
program is to be created during the creation of a CM program. The program
functions which are not available for the selected platform will be suppressed in
gray tones in the
Functions
window and will not be able to be used during the
program generation.

Pressing " Open " allows you to open an already generated and stored CM
program. CM programs use the file extension
*.hecmp
. Select the desired file in
the corresponding path for this purpose.

Select "
Save
" to save a CM program. If the recording has not yet been saved,
the “ Save as …“ window will open. Enter the desired file name for this purpose
in the respective path.

To save a file that has not yet been saved or to save a file that has already
been saved under a different name, select " Save as ... ", Enter the desired file
name for this purpose in the respective path.

To integrate an existing program that has already been saved into the current
program generation process, select " paste from file ". Select the desired file in
the corresponding path for this purpose.

Press " Print " to print out the content of the
Linked functions
window
(= program printout).

Press " Quit " to close the CM Editor.