Condition Monitoring Unit CMU 1000
Page 104
V03 R21 - 2020/07/09
HYDAC ELECTRONIC GMBH
Mat.-No.:
669749
7.7 Boolean Links
7.7.1 Not
The
Not
function supplies the negated Boolean input value at its
Boolean output.
I x = "0", then a "1" is output, otherwise a "0".
Inputs: x:
(Boolean)
Outputs: y:
(Boolean)
Parameters: -
7.7.2 And
The
And
function links the two Boolean inputs with the "and"
operation and supplies the result to its Boolean output.
The output is then "1" only if both inputs are "1", otherwise it is "0".
The following log table makes this function clear.
x
1
x
2
y
0 0 0
0 1 0
1 0 0
1 1 1
Inputs: x
1
: (Boolean)
x
2
: (Boolean)
Outputs: y:
(Boolean)
Parameters: -
7.7.3 Not - And
The
Not - And
function links the two Boolean inputs with the "nand"
operation and supplies the result to its Boolean output.
The output is then "0" only if both inputs are "1", otherwise it is "1".
The following log table makes this function clear.
x
1
x
2
y
0 0 1
0 1 1
1 0 1
1 1 0
Inputs: x
1
: (Boolean)
x
2
: (Boolean)
Outputs: y:
(Boolean)
Parameters: -