HYDAC ELECTRONIC CMU 1000, Руководство пользователя

Страница: 38 / 126

Condition Monitoring Unit CMU 1000 Page 38
V03 R21 - 2020/07/09 HYDAC ELECTRONIC GMBH Mat.-No.: 669749

To set up a connection with one "Slave" CMU (e.g. Address d), proceed as
follows:

Select
Change
in the
Pass-through mode
line. The following window opens:

Select the HSI channel in the selection window to which the slave devices are
connected (in our example, Port H at the "Master" CMU).

Afterwards, click on
Switch on
in order to switch on the pass-through mode for
the selected channel.

The following message appears:

Confirm this with
OK
.