Hyd-Mech DM-1215, Руководство по эксплуатации и обслуживанию

Страница: 36 / 136

5 − 2 35
Use and maintenance manual DM-1215
1 − INVERTER
Select the cutting speed range of the blade: from 15 to 100 m/min.
2 − FLUID REFRIGERANT SELECTOR
Allows the selection of manual functioning with the gun, flow deactivation in
zero position and automatic function, i.e. on starting-up of the belt motor the
pump also starts-up.
3 − DISPLAY BELT TENSIONING
Visualises the tension of the belt in kg on the LCD display.
4 − EMERGENCY STOP MUSHROOM BUTTON
Pressing this button immediately stops machine operation. The emergency
button, designed to conform to all safety standards, is positioned so that it is
easily accessible at any time and is clearly visible - being a red button on a yellow
background. To reset the emergency button, rotate actuator by 45°.
5 − CUTTING HEAD DESCENT SPEED ADJUSTER
Allows to adjust oil flow in the hydraulic cylinder to determine the cutting head
descent speed.
6 − AUTOMATIC THERMAL − MAGNET CUTOUT WITH MINIMUM
VOLTAGE RELAY AND HATCH LOCKING DEVICE
The machine is provided on the right of the control panel with a main switch with
a locking device which, when set in the ON position (1), powers up the machine
by resetting the minimum-voltage relay and the blade motor thermal magnet
cutout. This device has three protection systems against power failure. When
there is a power failure the electrical devices are all shut down, instantly shutting
down the machine and preventing automatic restoring of power on power return.
A further function is to reset the thermal relay, which protects against overcur­
rents.
7 − LASER / LAMP SELECTOR
Selector to activate the laser or the lamp for illumination of the cutting area.
8 − MANUAL OR GRAVITY − FEED CYCLE SELECTOR
Select manual or gravity-feed cutting cycle.
9 − SPRAY MIST BUTTON (OPTIONAL)
Activates or deactivates the band spray mist.