Hyd-Mech DM-1215, Руководство по эксплуатации и обслуживанию

Страница: 109 / 136

8 − 3 107 Maintenance and choice of consumables
apply lubricating oil to the rotating platform's internal circuit using ball valve
oiler situated in the rear part of the fixed platform.
Monthly
This section lists the operations to be carried out for the monthly maintenance of
the machine:
check the perpendicularity of the blade to the work surface; if it is necessary
to adjust the blade setting, follow the instructions set out in Chapter 7;
check on blade orthogonality with respect to the workpiece rest shoulder; if
adjustment is necessary, proceed as instructed in Chapter 7;
check that the 0° notch on the work table is in line with the graduation on the
turntable; if not, readjust by regulating the 0° stop; then re-check that the
blade is perpendicular and orthogonal;
check the precision of the 45° and 60° left stops and the 45° right stop; if
out-of-set, adjust following the steps indicated in Chapter 7;
check the state of the widia inserts and the blade steady button; replace if
worn or chipped; check their positions and adjust if necessary (see Chapter
7);
thoroughly clean the bottom of the water tank and the electropump filter;
controls the hydraulic brake oil level.
Maintenance of working parts
DM-1215 maintenance engineers must pay particular attention to functioning
elements such as the blade tensioning cylinder (already considered in chapter 7),
loading, the air treatment unit, the pneumatic vice (if AUTOMATIC VICE
version) and the hydraulic brake.
The transmission box equipping the machine needs no maintenance.
Consumable materials
Only specified oils must be used for the hydraulic and pneumatic and for
lubricant/coolant devices. Below is a list of compatible oils for each of these
circuits.