HYBREX IP 37-31, Руководство пользователя

Страница: 12 / 62

Dual Mode VoIP Keyphone IP37-31
6
A. VoIP Calls
The IP 37-31 Dual-mode VoIP Keyphone can be used with a standard IP-PBX that runs
VoIP SIP protocol. However, the instructions below describe the features developed only for
the VP (VoIP Platform) series IP-PBX.
A1. Making Calls
The VP series IP-PBX is a feature-rich communication platform that provides flexible
numbering and various routing functions. The user only needs to know the called party
‟s
number to make a call; the VP automatically decides whether this call is intercom, to a CO
Line number, to another station within the same IP-PABX, to other stations over another VP
or VoIP Gateway, or to a traditional PSTN terminal through the Gateway of the ITSP(Internet
Telephony Service Provider). All these complicated routings were handled by the VP, while
the user just needs to dial the number.
A1.1 Dialing a Number
To make call by dialing a number on the Dial Keypad:
(1) Lift the handset or press [ SPK ] key, the dial tone will be heard and the upper line
of the LCD screen will show “IP Dialing.. 1”.
(2) Dial the telephone number.
(3) Press the [ # ] key to send out the telephone number immediately, or wait for a few
seconds (refer to section C2.7 “Auto dial time”) and the keyphone will send out the
number automatically.
Note: Before pressing the [ # ] key, the user can delete any wrongly-entered digits by
pressing the [ Left ] key.
A1.2 DSS Direct Dial
The DSS feature of the keyphone must be set up (refer to section C1.2) before the
user can use it. The dual-color LED of the [ DSS/ BLF ] buttons indicate the status of
the assigned stations (online, offline, busy, or idle). The user can call that station by
simply pressing the respective [ DSS/BLF] button.
Note: The IP 37-31 Dual-mode VoIP Keyphone has 10 [ DSS/BLF ] buttons.
A1.3 Last Number Redial
The keyphone automatically stores the last dialed number.
To call that number again, follow the steps below:
(1) Lift the handset or press [ SPK ] key, wait for the dial tone.
(2) Press [ Redial ] key to call the last dialed number.
A1.4 Hotline
The user can call a preselected station by simply picking up the handset or pressing
the [ SPK ] key. This feature can be used to establish a direct-communication between
important personnel, or used at public locations for emergency call.
Steps of Operation: Lift the handset or press the [ SPK ] key to automatically call the
preselected station.