Dual Mode VoIP Keyphone IP37-31
7
A2. Receiving Calls
A2.1 Answer
When the keyphone is ringing (the front indicator light flashes rapidly), the user can
answer the call.
Steps of Operation:
(1) Picking up the handset to answer the call directly.
(2) Or press the [ SPK ] key to answer the call in Handsfree mode.
A2.2 Call Pickup
This feature allows a user to answer a call ringing at another station. As telephone sets
are assigned into different groups, Call Pickup can be done by different ways:
Pick up a call in the same group:
(1) Lift the handset or press the [ SPK ] key.
(2) Dial
[
＊
0 ]
to answer for another station.
Pick up a call in other groups
(1) Lift the handset or press the [ SPK ] key.
(2) Press the
[
＊
9 ]
, then
(3) Dial the
[ group code ]
(01 to 63, for a total of 63 groups) to pickup call.
A2.3 Auto Answer
Auto Answer allows the phone to automatically answer the call by Handsfree mode.
This feature is especially convenient for people in
public areas as they can answer
calls without touching the phone.
Set the phone to Auto Answer:
Press [ MIC ] key to activate / deactivate this feature.
Note
:
The [ MIC ] key LED indication when the phone is idle.
Red light constantly on: Auto Answer mode
Red light off:
Normal mode
A2.4 Answer the Second Call
The VP can flexibly assign a second line to the IP 37-31 keyphone.
Suppose that the IP 37-31 has two lines connected to the VP, if an extension calls this
station while it is on a call with the first line, the user of the IP 37-31 will hear a
call-waiting tone, however, the caller from the second line will not notice the IP 37-31 is
busy on the first line. If the VP activates the BLF (Busy Lamp Field) function on the IP
37-31, the Busy status will be shown when the phone is on a call. There are two ways
to handle such situation:
Hang up the phone to end the first call, wait for the ring tone, then pick up the
handset or press [ SPK ] key to answer the second call.
Place the first call on hold and answer the second call:
(1) Press [ HOLD ] key to place the first call on hold and switch to the second call.
(2) To switch back to the first call, simply hang up the handset and lift it again.
Note
:
Please refer to section A4.4 and A4.5 for the steps to operate the Conference and the
Содержание IP 37-31
Страница 6: ......
