Dual Mode VoIP Keyphone IP37-31
47
C6.4 Tones Settings
The settings below allow the user to adjust the frequency of different signals and their on/off
time. These settings shall only be changed by a technician.
Dial Tone:
This tone indicates that the line is ready and the user can start
dialing.
Ring Back Tone: The tone is heard when the phone is ringing at the called party.
Busy Tone:
The caller will hear this tone when the called party is busy.
Congestion Tone: The caller will hear this tone when the line is busy (system busy).
Ring Tone:
The tone made by the telephone to indicate an incoming call.
Call Waiting Tone: The user on a call would hear this tone when another user calls.
Cadence On:
Tick this option to enable the ON/Off interval of the tone.
Hi-Tone Freq.:
The frequency of the high-pitched tone.
Lo-Tone Freq.:
The frequency of the low-pitched tone.
Hi-Tone Gain:
The volume of the high-pitched tone.
Lo-Tone Gain:
The volume of the low-pitched tone.
On Time 1:
The time length of the tone part in the 1st section of the total tone
cycle.
Off Time 1:
The time length of the silence part in the 1st section of the total
tone cycle.
On Time 2:
The time length of the tone part in the 2nd section of the total
tone cycle.
Off Time 2
;
The time length of the silence part in the 2nd section of the total
tone cycle.
On Time 3
;
The time length of the tone part in the 3rd section of the total tone
cycle.
Off Time 3:
The time length of the silence part in the 3rd section of the total
tone cycle.
The buttons are as follow:
[Submit]: Apply the settings.
[Reset]: Clear all fields.
Содержание IP 37-31
Страница 6: ......