Hwasung HMC-081, Техническое руководство

Страница: 52 / 66

Title Rev. Page
HMK(P)-081,HMC-081 Ver1.0
52
DC3+’i’
[Name] Cutting after it detects the black mark.
[Format] ASCII DC3 i
Hex 13 69h
Decimal 19 105
[Descript] - The value is not deleted until the next value is changed, even though power off.
If you register the information at SW1,SW2, the black mark detects automatically,
Then it cuts the registerd points.
- Please use the given program - ‘memory swtich setting utility program’.
- Please refer the 2-8)Memory switch.
SUB+’1’
[Name]
Line 1 (Vertical, Horizontal)
[Format] ASCII SUB 1
Hex 1A 31h
Decimal 26 49
[Descript] It chooses the line 1 of vertical, horizontal.
SUB+’2’
[Name]
Line 2 (Vertical, Horizontal)
[Format] ASCII SUB 1
Hex 1A 32h
Decimal 26 50
[Descript] It chooses the line 2 of vertical, horizontal.
SUB+’W’+nL+nH+kL+kH
[Name] Write (Vertical, Horizontal)
[Format] ASCII SUB W nL nH kL kH
Hex 1A 57h nL nH kL kH
Decimal 26 87 nL nH kL kH
[Range] 0 ≤ nL+nH×256 ≤ 640 、 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 3)
0 ≤ kL+kH×256 ≤ 640
、
(0 ≤ kL ≤ 255, 0 ≤ kH ≤ 3)
[Descript] You can write 1 from nL+nH×256 to kL+kH×256.
[Caution] The range will be ignored, if the range is over.
The data will not be deleted, till you command the data to clear, or power off.
SUB+’C’
[Name]
Clear (Vertical, Horizontal)
[Format] ASCII SUB C
Hex 1A 43h
Decimal 26 67
[Range] The all of line will be clear as 0 (zero).
[Caution]
Please direct ON/OFF to speed up the process.
It is to write again the data of line.
SUB+’O’
[Name]
ON (Vertical, Horizontal)
[Format] ASCII SUB O
Hex 1A 4Fh
Decimal 26 79
[Descript] It writes the character together.