Hwasung HMC-081 Скачать руководство пользователя страница 17

Страница: 17 / 66

Title Rev.

Page

HMK(P)-081,HMC-081 Ver1.0

b) 2 :

SW2

Black Mark valid/invalid

Description

Black Mark valid

After the black mark is detected,
the initial paper is positioned.

OFF

Black Mark invalid

The black mark of the initial paper is not detected.

Notice :

If it’s valid, please use the paper with the black mark, or it occurs the paper jam.

Notice :

Please make sure the specification of the paper should be the same with the registered

informations.

Notice :

Please refer to 2-8) memory switch.

c) 3 :

SW3

First Page Mode

Description

First Page No Cut

The paper is not cut, once the initial paper is positioned.

OFF

First Page Cut

The paper is cut, once the initial paper is positioned.

Notice :

Please make sure the specification of the paper should be the same with the registered

informations.

Notice :

Please refer to 2-8) memory switch.

d) 4 :

SW4 RS-232C/Ethernet

Mode

Description

Ethenet Mode

Ethernet interface is valid.

OFF

RS-232C Mode

RS-232C interface is valid.

Notice :

You can’t use the interface Ethernet and the interface RS-232C together.

e) 5 :

SW5 JamSensor

valid

/invalid

Description

Jam Sensor valid

Jam Sensor is valid.

OFF

Jam Sensor invalid

Jam Sensor is invalid.

Notice :

Jam Sensor assembly is option.

Notice :

If the Jam sensor assembly is not accomodated and the jam sensor is valid (on),

it dectects the paper Jam. It means it’s not workinig normally.

f) 6 :

SW6

Presenter valid / invalid

Description

Presenter valid

Presenter is valid.

OFF

Presenter invalid

Presenter is invalid.

Notice :

Presenter is option.

Notice :

If the presenter is not accomodated and the presenter is valid (on),

it dectects the paper Jam. It means it’s not workinig normally.

g) 7 :

SW7 Reserve

Description

ON -----

OFF -----

h) 8 : Update / print mode

SW8

Update / print mode

Description

Update mode

Firmware update mode

OFF

Print mode

Standard print mode

Содержание HMC-081



































































Результаты поиска

Содержание HMC-081

Отзывы:

Hwasung HMC-081, Техническое руководство, Страница: 17 / 66

Результаты поиска

Содержание HMC-081

Отзывы: