Hwasung HMC-081 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 66

Hwasung HMC-081 Скачать руководство пользователя страница 64

9. How to set up Ethernet

9-1) If it is Static IP Mode,

1) Please connect the network cable to the printer.
2) Please set up the small switch 1 of DIP switch 1 *OFF (Static IP Mode). *OFF: (DIP switch) down
3) Please set up the small switch 2 of DIP switch 1 *ON (Boot into Default Value). *ON: (DIP switch) up
4) Please power on the printer. * IP the factory 192.168.1.250 / The port 9100 will be boot up.
5) Please conduct the program Ethernet Configuration.
6) Please type down the parameter you want at the Target Parameter, and press the button connect.
7) Then you can see the message Success Connection, and the button Start Write will be activated.

Title Rev.

Page

HMK(P)-081,HMC-081 Ver1.0

64

①

②

③

8) Please press the button Start Write.
9) The message indicates the transmission complete,

and the parameter will be saved at the non-volatile memory.

10) Please power off the printer.

11) Please set up the small switch 2 of DIP switch 1 *OFF (Boot Into User Value).
*OFF: (DIP switch) down

12) Please power on the printer, once you press down the button feed.
13) Then you can see about the self test is printing, and the parameter for user is printing.
14) Please check the parameter for user.
15) Please power off, and on the printer. The parameter for user is boot up.
You can use the paramer for user at the application.

Caution)

If the IP address is collied with the IP network after you boot up into the default value,

you can’t change the setting.

We recommend you don’t use the share machine, you connect the printer with PC directly.
Please try to set up the network to avoid with IP address.
Please try to catch up IP address to avoid automatically, as you boot up DHCP mode.
Please refer to the next page about DHCP mode.

«
...
62
63
64
65
66
»

Содержание HMC-081



































































Отзывы:

Нет отзывов