Hwasung HMC-081, Техническое руководство

Страница: 31 / 66

Title Rev. Page
HMK(P)-081,HMC-081 Ver1.0
31
ESC+SP+n
[Name]
Set the space amount on the right of ASCII character
[Format] ASCII ESC SP n
Hex 1B 20h n
Decimal 27 32 n
[Range] 0 ≤ n ≤ 255
[Initial Value] n=0
[Descript]
Set in n x 0.125mm the space amount on the right of ASCII character
[Caution] Set the Korean space in FS+’S+n
ESC+’!’+n
[Name]
-
[Format] ASCII ESC ! n
Hex 1B 21h n
Decimal 27 33 n
[Range] 0 ≤ n ≤ 255
[Initial Value] n=0
[Descript] Set font & character in the same time
[Caution] If it’s Korean, the Font / the Stress is valid only.
Bit Format Hex Decimal
0: Font 12x24, 24x24 00h 0 0
1: Font 8x16, 16x16 01h 1
1 - - -
2 - - -
0: Cancel the stress 00h 0 3
1: Set the stress 08h 8
0: Cancel the extension in Vertical 00h 0 4
1: Set the extension in Vertical 10h 16
0: Cancel the extension in Horizontal 00h 0 5
1: Set the extension in Horizontal 20h 32
6 - - -
0: Cancel the underline 00h 0 7
1: Set the underline 80h 128
ESC+’$’+nL+nH
[Name]
Set absolute poisition
[Format] ASCII ESC $ nL nH
Hex 1B 24h nL nH
Decimal 27 36 nL nH
[Range] 0 ≤ nL+nH×256 ≤ 65535, 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255
[Initial Value] nL=0, nH=0
[Descript]
Move the position from the space of left ending to (nL+nH×256)×0.125mm.
Move the position into the space of left ending, if the area is over.