IP WatchDog2 - Manual
HW group
March 2015
Page 2
Shipment contents
Complete package of IP Watchdog2 contains the following items:
IP WatchDog2 in mechanical design according to ordering no.
Printed Manual
Power adaptor
Ethernet cable
Safety at work
The device complies with the standards in force in the Czech Republic, is operationally tested and is
supplied in a serviceable condition. To keep the device in this state, it is necessary to follow the
requirements on safety and maintenance of the device.
The device must not be used if:
It is visibly damaged.
Is not working properly.
There are loose parts inside the device
Been exposed to moisture or water.
It was repaired by unauthorized persons.
The power adaptor or its power cord are visibly damaged.
Manufacturer has responsibility of the device only if it is powered by the supplied or recommended
power supply.
Default network parameters configuration:
IP address:
192.168.10.20
Network mask
255.255.255.0
Default gateway:
192.168.10.1
IP configuration via DHCP
Enabled
User name: Not set
User name: Not set
