Huvitz HOCT-1F/1 Скачать руководство пользователя страница 8

Страница: 8 / 108

2.1.

Usage Precautions

This equipment has been developed and tested in conformity with domestic & international safety

standards and regulations, which guarantees the high stability of this product. This guarantees a very

high degree of safety for this device. The legislator expects us to inform the user expressively about

the safety aspects in dealing with the device. The correct handling of this equipment is imperative for

its safe operation. Therefore, please read carefully all instructions before switching on this device.

For more detailed information, please contact our Customer Service Department or one of our

authorized representatives.

For use of equipment in rated voltage less than 125Vac, minimum 6A, Type SJT or SVT,

18/3AWG, 10A, max 3.0m long: One end with Hospital Grade Type, NEMA 5-15P Other end with

appliance coupler. For use of equipment in rated voltage less than 250Vac, minimum 6A, Type

SJT or SVT, 18/3AWG, 10A, max 3.0m long: One end terminated with blade attachment

plug(HAR) Type, NEMA 6-15P.

Use instrument that comply with IEC60601-1 in the patient environment. [The figure below show]

If and instrument that does not comply with IEC 60601-1 is to be used, use an isolation transformer.

If a person handling a conductive part of the system comes into contact with a patient at the same

time, hazard may occur due to leakage current exceeding the value specified in the applicable

standard. Be careful not to touch patients when connecting or removing the power plug or cable

connectors.

CAUTION

Содержание HOCT-1F/1













































































































Результаты поиска

Содержание HOCT-1F/1

Отзывы:

Бренды по названию

Популярные бренды

Huvitz HOCT-1F/1, Руководство пользователя

Результаты поиска

Содержание HOCT-1F/1

Отзывы:

Бренды по названию

Популярные бренды