-------------------------------------------------------------------------------------------------- Non-Contact Tonometer HNT-1/1P 13
and maintenance can access easily any time.
20.
Do not force cable connections. If a cable does not connect easily, be sure that the connector (plug) is
appropriate for the receptacle (socket). If you cause any damage to a cable connector(s) or receptacle(s),
let the damage(s) be repaired by an authorized service technician.
21.
Please do not pull on any cable. Always hold on to the plug when disconnecting cables.
22.
External equipment intended for connection to signal input, signal output or other connectors, shall
comply with relevant IEC Standard (e.g., IEC60950 for IT equipment and IEC60601-1 series for medical
electrical equipment). In addition, all such combination-system-shall comply with the standard IEC60601-
1 harmonized national standard or the combination. If, in doubt, contact qualified technician or your local
representative the operator should not touch the patient and accessible male parts of the SIP/SOP
connectors simultaneously.
23.
Before every operation, proceed with visual inspection on the equipment exterior to seek any mechanical
damage(s) to ensure the proper functioning.
24.
Do not obstruct any ventilation outlet for proper heat dissipation.
25.
In case of any presence of smoke, spark or abnormal noise/smell from the machine, please power off
immediately and pull out the plug.
26.
IEC standard needs to be satisfied with in order to connect an outside device with input/output signal or
other connector. (IT equipment is IEC 60950, and electric equipment for medical use is IEC 60601).
Moreover, all the systems need to satisfy the safety requirement, IEC 60601-1 when it comes to the
electric system for medical use. Person who connects outside device with input/output signal or other
connector has the obligation to take responsibility in accordance to the IEC60601-1. Contact local
technician or distributor if you have doubts.
27.
To avoid electrocution, this device must be connected to the supply power along with protective
grounding.
28.
Do not place at a difficult location when separating cable when it comes to the device’s placement.
29.
When you carry this product, please hold on left and right bottom of the product. If you want the product
to be installed on another place, please call A/S center.
30.
Do not measure an eye whose cornea is easily damaged due to corneal disease or surgery.
31.
When instrument is send back to A/S center for repair or maintenance, or before authorized service man is arrived at
the place for repair or maintenance, wipe the surfaces of the instrument (especially, the parts that come into contact
with the patient) with a clean cloth dampened with rubbing alcohol
