-------------------------------------------------------------------------------------------------- Non-Contact Tonometer HNT-1/1P 11
2.4. Safety Precaution
BEFORE USE, READ THIS MANUAL
The safety precautions and operating procedures must be thoroughly understood prior to
operation of the device.
This equipment has been developed and tested in conformity with domestic & international safety
standards and regulations, which guarantees the high stability of this product. This guarantees a very
high degree of safety for this device. The legislator expects us to inform the user expressively about the
safety aspects in dealing with the device. The correct handling of this equipment is imperative for its
safe operation. Therefore, please read carefully all instructions before switching on this device. For more
detailed information, please contact our Customer Service Department or one of our authorized
representatives.
1.
Light Hazard Group I (according to the ISO15004-2)
This device is classified as a Group I. The LED used for the device is safe under expected use.
However, observe the following precautions when using the device.
-
Do not direct LED beams to human eyes when unnecessary.
-
Do not look into the objective lens for a prolonged time.
-
If the device cannot be used appropriately or any problem cannot be solved, Stop using the
devcie immediately, and contact Huvitz or your authoirzed distributor
-
2.
Do not touch directley if an operator has a hand injury or a significant allergic reaction to the material
used in the operaton contact part.
Part Name
Material
LCD Touch pannel
Glass
Joystick / button
ABS + Silicon, Spray
Power switch
PC + PA66
Safety button
A6061 T6, SILVER ANODIZING
Cover
ABS
Printer cover
ABS
Chin Rest
ABS
3.
This equipment must not be installed (a) in an area that is in danger of explosions and (b) in the presence
!
