Huvema CRDM 3050 x 16/1, Руководство по эксплуатации

Страница: 4 / 66

4
1. Summary of the machine
1. 1 GENERAL SAFETY RULES
Operator must read the instruction before operating the machine, and the
manager of safety department should assure the operator knows the requirem-
ents well.
WARNING! NEVER CONTACT THE CUTTERS AND OTHER DRIVING
PARTS WITH HANDS IF THEY ARE STILL RUNNING.
1.1.1 The operation, maintenance and repair of the machine must be done by
qualified person who have been trained to have the ability to forecast the potential
risks. Only safety-conscious persons who are fully aware of the risks can operate
the machine.
1.1.2 To those people who assemble, operate, or maintain the machine must be
confirmed to have read and understood the operating instructions.
1.1.3 After stopping the machine, the tool will still run for a period of time due to
inertia, do not open the tool guard and touch the tool with your hand before it
comes to stop running.
1.1.4 Do not detach or modify any part of the safety guard. The machine should
be disconnected from the power supply during maintenance or repair.
1.1.5 Assign special persons to operate, maintain and adjust the machine.
1.1.6 Operate the machine in technically perfect condition. Only the producer or
qualified person can completely repair the machine.
1.1.7 Stop the machine immediately if abnormal phenomena appear, check and
repair the machine by specialized persons in time.
1.1.8 Disassembly and assembly the machine with the hoisting equipment, which
is of enough load capacity.
1.1.9 Observe all safety instructions and warnings attached to the machine, make
sure they are always complete and perfectly legible.
1.1.10 Do safety inspection before operating. Ensure the stroke limit switches,
stop block and emergency stop button safe and reliable.
1.1.11Reinstall the removed guards and safety devices in place after maintaining.
1.1.12 Do maintenance or adjustment only after switching the machine off and