Huvema CRDM 3050 x 16/1, Руководство по эксплуатации

Страница: 30 / 66

30
to clamp headstock and column. The two clamp actions can carry through at the
same time; The two clamp actions can carry through separately too.( pushbutton
1-6 on the panel of headstock), middle position is tight, left position is to loosen
the column separately, right position is to loosen the headstock separately.
(pushbutton 1—18
，
1—19) (see Figure 3.1)
Handle list (see Figure 3.1)
Position Name Position Name
1—1
E-stop pushbutton 1—11 Preset spindle feed knob
1—2
Arm down pushbutton 1—12 Preset spindle speed knob
1—3
Arm up pushbutton 1—13
Spindle handle of clockwise,
counterclockwise, neutral
1—4
Main motor stop
pushbutton
1—5
Main motor start
pushbutton
1—15 manual/power feed switch handle
1—6
clamp selected knob of
Headstock and column
1—16 switch
1—7
The handle of setting
travel and limit position
1—17 Micro feed handwheel
1—8
Dial inching adjusting
handle
1—18
loose pushbutton of headstock and
column
1—9
Spindle moving handle 1—19
clamp pushbutton of headstock and
column
1—10
Headstock moving
handle
l—20 coolant adjustable valve knob