HUSTLER FasTrak 926501, Руководство пользователя, Страница: 9 / 32

Moving tractor with stalled engine
If it becomes necessary to move the tractor when the engine is
inoperative, the integrated pump/motor units are equipped with bypass
valves. Before moving the unit, pull out on the bypass valve rods and slide
them into the slot to lock in position. Both bypass valve rods are located at
the rear of the engine platform. (Fig. 3-6)
The control levers must be placed in the neutral position, to release the
park brakes, so that the tractor can be moved.
Do not tow the machine. Move it by hand or use a winch to load on a
trailer for transporting.
When transporting on another vehicle, the tractor should be facing
forward and it must be secured.
IMPORTANT: Always make certain the two bypass valves are
returned to their operating position before running the tractor following
repairs.
Driving the tractor
DANGER: Never make sudden stops or reverse direction,
especially when going down a slope. The steering is designed for
sensitive response. Rapid movement of the control levers in
either direction could result in a reaction of the tractor that can
cause serious injury.
After starting engine, engage the control levers and steer as follows:
To go forward, push control levers forward an equal distance (Fig. 3-7).
To go in reverse, pull control levers rearward an equal distance (Fig. 3-
7).
To turn left, move the right control lever farther forward from neutral
than the left control lever.(Fig. 3-7)
To turn right, move the left control lever farther forward from neutral
than the right control lever. (Fig. 3-7)
To pivot turn, move one control lever forward and the other control
lever back of neutral. This will allow the drive wheels to counter-rotate.
(Fig. 3-7)
To stop or decrease speed, move control levers to neutral. When going
forward pull back gently on control levers. When going in reverse push
forward gently on control levers.
DANGER: When going in reverse push forward gently on
control levers and avoid sudden movement. Any sudden
movement could cause the front of the mower to come off of the
ground resulting in possible loss of control.
IMPORTANT: Rapid movement of control levers is not recommended
as damage to the hydraulic system components may occur.
To increase speed, increase control lever’s distance from neutral. The
farther forward control levers are from neutral, the faster tractor will travel
forward. The farther back control levers are from neutral, the faster tractor
will go in reverse.
Operating suggestions
DANGER: Prior to operating the tractor the operator should be
thoroughly familiar with the proper use and operation of the
equipment, should read the manual completely and thoroughly,
and should have attempted slow moving maneuvers to become
familiar with the operation of the equipment before attempting
normal speed operation. An inexperienced operator should not
mow on slopes or on uneven terrain.
WARNING:
The unit’s control levers are very responsive: Easy
does it! For smooth operation, move lever slowly, avoid sudden
movement. Skill and ease of operation come with practice and
experience. The machine can spin very rapidly. Use caution
when making turns and slow down before making sharp turns.
WARNING: Children or bystanders may be injured if they move
or attempt to operate the tractor while it is unattended. Always
disengage deck clutch, place control levers in park brake position,
stop tractor engine, and remove ignition key when leaving
operator’s seat.
Inexperienced operators may have a tendency to oversteer and lose
control. Slow-moving practice maneuvers are recommended to become
familiar with these characteristics before attempting normal speed
operation.
WARNING: Sharp depressions or raised obstacles (such as
gutters or curbs) should not be directly approached at high speed
in an attempt to “jump” them as the operator could be thrown
from the equipment. Approach at a slow speed and angle one
drive wheel at the obstruction. Continue at an angle until the
wheel clears and then pivot the opposite wheel around.
When turning on soft wet turf, keep both wheels rolling either forward
or backward. Pivoting on one stopped wheel can damage turf. This is
especially important when mowing.
Tractor performance is maximum when the throttle is set at full rpm.
This gives maximum power to the drive wheels and deck when needed.
Use the control levers to control ground speed rather than engine rpm.
WARNING: Do not operate the equipment while wearing
sandals, tennis shoes, sneakers, shorts or any type of loose fitting
clothing. Always wear long pants, safety glasses, ear protection
and safety shoes when operating this machine.
3-3 365270 Rev. 9/03
FRONT OF TRACTOR FACES THIS DIRECTION
Figure 3-7
FORWARD TRAVEL PIVOT TURN REVERSE TRAVEL
RIGHT TURN
REVERSE TRAVEL
N N
FORWARD TRAVEL
RIGHT TURN
N = Neutral Position
Direction of arrows indicate direction of tractor movement.