Hussmann SSWHI, Руководство по установке и эксплуатации

Страница: 15 / 32

Hussmann® Impact™ Hot Food Merchandiser Installation
13
c. Tighten the screws and check glass for proper operation.
5. Slowly open and close the glass to make sure that it is still not hitting adjacent glass.
Each glass has been shipped with a flexible wiper gasket attached to each side. These are
designed to overlap each other, sealing the gap between the glass and allowing side-to-side
glass adjustment. After all glass has been adjusted as defined in Step 4, the flexible portion of
one gasket at a joint may be trimmed with a razor knife. Be sure that the remaining wiper gasket
seals the gap. Verify proper operation.
Raising/Lowering Glass Using Adjustment Bolt
If the glass still does not open or close correctly, adjustment of the top frame may be necessary.
This case is equipped with an adjustment bolt at the top rear of the case to raise or lower the glass. This
allows for improvements in the glass operation and sealing. The following outlines how to access the
adjustment bolt. The top must be free to move as the adjustment bolt is turned.
1. Loosen joining or end bolts at top of case, (2 at each end of case).
2. If caulk or silicone has been applied between case joints or ends in the top area it must be
removed.
3. Remove rear doors.