3-2
D
RIP
P
IPING AND
S
PLASHGUARDS
P/N 0378414G
See the case data sheet set for dimensions. Each
waste outlet will be interconnected with factory
installed drip piping. When a 6 ft (1829 mm) end
merchandiser is ordered to be joined to a center
case at the factory, its waste outlet can also be
interconnected as shown. A drain piping connect
kit is required.
Each merchandiser is supplied with a 2 in.
(51 mm) water seal, an adapter, a plug and a
street ell. The street ell and water seal must be
installed to prevent air leakage and insect
entrance into the merchandiser. They should be
installed as shown below.
Produce / Meat Wide Island Merchandisers
End Case
6, 8 or 12 Ft Case
(1829, 2438 or 3658 mm Case)
Base
Cleanout Adapter
and Plug Standard
Raceway
NOTE:
Water seal outlet must clear front skid rail.
