Hussmann IMPACT D5RRI, Руководство по эксплуатации и обслуживанию

Страница: 3 / 26

IMPACT Rear Roll-in
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
P/N 0435045A 1-1
NSF CERTIFICATION
These merchandisers are manufactured to meet
ANSI / National Sanitation Foundation (NSF
®
)
Standard #7 requirements. Proper installation is
required to maintain certification. Near the serial
plate, each case carries a label identifying the
type of application for which the case was
certified.
ANSI / NSF-7 Type I – Display Refrigerator / Freezer
Intended for 75°F / 55%RH Ambient Application
ANSI / NSF-7 Type II – Display Refrigerator / Freezer
Intended for 80°F / 55%RH Ambient Application
ANSI / NSF-7 – Display Refrigerator
Intended for Bulk Produce
MODEL DESCRIPTION
The D5RRI and D5RRIS models are designed
for installation against an opening in the cooler
wall. The cases are open at the rear. Once
installed, product can be rolled directly from
the cooler through the rear of the caser into the
refrigerated display area.
The D5RRI is a self-supporting model with the
canopy and front sections connected by welded
end supports.
The D5RRIS is manufactured in two sections:
a Coil Package and a Front Package. The coil
package is to be suspended against the cooler
wall, above the opening, from an adequate
supporting structure in the store. The front
package completes the D5RRIS model once it
has been aligned with the coil package and
anchored to the floor.
Both models are designed to align with the D5L.
LOCATION
These cases are designed for displaying products
in air conditioned stores where temperature is
maintained at or below the ANSI/NSF-7 specified
level and relative humidity is maintained at or
below 55%.
Placing refrigerated cases in direct sunlight, near
hot tables or near other heat sources could impair
their efficiency.
Like other cases, these are sensitive to air distur-
bances. Air currents passing around cases will
seriously impair their operation. Do NOT allow
air conditioning, electric fans, open doors or
windows, etc. to create air currents around the
cases.
Product should always be maintained at proper
temperature. This means that from the time the
product is received, through storage, preparation
and display, the temperature of the product must
be controlled to maximize the life of the product.
SHIPPING DAMAGE
All equipment should be thoroughly examined
for shipping damage before and during unload-
ing.
This equipment has been carefully inspected at
our factory. Any claim for loss or damage must be
made to the carrier. The carrier will provide any
necessary inspection reports and/or claim forms.
Apparent Loss Or Damage
If there is an obvious loss or damage, it must be
noted on the freight bill or express receipt and
signed by the carrier’s agent; otherwise, carrier
may refuse claim.
Concealed Loss Or Damage
When loss or damage is not apparent until after
equipment is uncrated, retain all packing materials
and submit a written request to the carrier for
inspection, within 15 days.
INSTALLATION
Do not walk or put heavy objects on case.
CAUTION
!