Husqvarna TX 125, Руководство пользователя

Страница: 47 / 146

12 SERVICE WORK ON THE CHASSIS
45
12.1 Raising the motorcycle with the lift stand
401942-01
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame below the engine.
Lift stand (81329955000)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
12.2 Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401943-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand

to the ground with your foot and
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
12.3 Bleeding the fork legs
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 45)
402556-10
Main work
–
Release bleeder screws  .
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 45)
12.4 Cleaning the dust boots of the fork legs
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 45)
–
Remove the fork protector. ( p. 47)
H00175-10
Main work
–
Push dust boots

of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles from the inside fork
tubes. Over time, dirt can accumulate behind the dust boots. If this dirt is
not removed, the oil seals behind can start to leak.