Husqvarna TX 125 страница 85 Скачать руководство пользователя

Страница: 85 / 146

14 WHEELS, TIRES

–

Insert the spacers.

F00313-11

–

Lift the front wheel into the fork, position it, and insert the wheel spindle.

The brake linings are correctly positioned.

–

Mount and tighten screw



Guideline

Screw, front wheel spindle

M20x1.5

35 Nm (25.8 lbf ft)

–

Operate the hand brake lever several times until the brake linings are seated cor-

rectly against the brake disc.

–

Remove the motorcycle from the lift stand. (

p. 45)

–

Operate the front brake and compress the fork a few times firmly.

The fork legs straighten.

–

Tighten screws



Guideline

Screw, fork stub

15 Nm (11.1 lbf ft)

14.3

Removing the rear wheel

Preparatory work

–

Raise the motorcycle with the lift stand. (

p. 45)

E00427-10

Main work

–

Press the brake caliper onto the brake disc by hand in order to push back the

brake piston.

Info

Make sure when pushing back the brake piston that you do not press the

brake caliper against the spokes.

–

Remove nut



–

Remove chain adjuster



. Withdraw wheel spindle



only enough to allow the

rear wheel to be pushed forward.

–

Push the rear wheel forward as far as possible. Remove the chain from the rear

sprocket.

Info

Cover the components to protect them against damage.

Warning

Danger of accidents

Damaged brake discs reduce the braking effect.

–

Always lay the wheel down in such a way that the brake disc is not

damaged.

–

Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of

the swingarm.

Info

Do not operate the foot brake lever when the rear wheel is removed.

H00936-10

–

Remove spacers



Содержание TX 125



















































































































































Результаты поиска

Содержание TX 125

Отзывы:

Похожие инструкции для TX 125

Бренды по названию

Популярные бренды

Husqvarna TX 125, Руководство пользователя

Результаты поиска

Содержание TX 125

Отзывы:

Похожие инструкции для TX 125

Бренды по названию

Популярные бренды