Husqvarna TX 125 страница 21 Скачать руководство пользователя

Страница: 21 / 146

CONTROLS

6.22

Side stand

401943-10

The side stand



is on the left side of the vehicle.

401944-10

The side stand is used to park the motorcycle.

Info

When you are riding, side stand



must be folded up and secured with rub-

ber band



6.23

Steering lock (TE 250/300 EU/AU, TX 125 EU)

V00392-10

The steering lock



is fitted on the left side of the steering head.

The steering lock is used to lock the steering. Steering, and therefore riding, is no

longer possible.

6.24

Locking the steering (TE 250/300 EU/AU, TX 125 EU)

Note

Danger of damage

The parked vehicle can roll away or fall over.

–

Park the vehicle on a firm and level surface.

400732-01

–

Park the vehicle.

–

Turn the handlebar as far as possible to the right.

–

Insert the key in the steering lock, turn it to the left, press it in, and turn it to the

right. Remove the key.

Steering is no longer possible.

Info

Never leave the key in the steering lock.

Содержание TX 125



















































































































































Результаты поиска

Содержание TX 125

Отзывы:

Похожие инструкции для TX 125

Бренды по названию

Популярные бренды

Husqvarna TX 125, Руководство пользователя

Результаты поиска

Содержание TX 125

Отзывы:

Похожие инструкции для TX 125

Бренды по названию

Популярные бренды