Husqvarna Royale, Руководство пользователя

Страница: 25 / 144

A
B
C
D
E
2:5
2 Set Up
THREADING THE UPPER
THREAD
Make sure that the presser foot is raised and the needle is
in the up position.
HORIZONTAL SPOOL PIN
+ROGWKHWKUHDGQHDUWKHVSRROXVLQJ\RXUULJKWKDQG
8VH\RXUOHIWKDQGWREULQJWKHHQGRI WKHWKUHDGRYHU
and behind the
3UH7HQVLRQ7KUHDGJXLGH$DQG
under the
WKUHDGJXLGH%%ULQJWKHWKUHDGEHWZHHQ
the thread
WHQVLRQGLVFV&
3. Continue threading in the direction indicated by
WKHDUURZV%ULQJWKHWKUHDGIURPWKHULJKWZKHQ
threading into the slot on the
WDNHXSOHYHU'
4. Take the thread down into the last thread guide
(
MXVWDERYHWKHQHHGOH
NEEDLE THREADER
The needle threader allows you to thread the needle
automatically. The needle must be in the up position to use
the
%XLOW,QQHHGOHWKUHDGHU
1. Lower the presser foot.
2. Use the handle to pull the needle threader all the way
down. The
WKUHDGHUKRRN*VZLYHOVWKURXJKWKH
needle eye.
3ODFHWKHWKUHDGIURPWKHEDFNRYHUWKHKRRN)DQG
XQGHUWKHWKUHDGKRRN*
4. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms
a loop behind the needle. Pull the thread loop out
behind the needle.
Note: The needle threader is designed to be used for size 70-120
needles. You cannot use the needle threader for needles size 60 or
smaller, the wing needle, twin needle, triple needle or when the Sensor
One-Step buttonhole foot is attached. There are also some optional
accessories that require manual threading of the needle.
When threading the needle manually, make sure that the needle
is threaded from front to back. The bobbin cover can be used as a
magnifying glass to make threading easier.
F
G
F
G