Husqvarna Royale, Руководство пользователя

Страница: 26 / 144

A
B
C
D
E
E
2:6
2 Set Up
THREADING FOR TWIN NEEDLE
Replace the sewing needle with a twin needle. Make
sure the presser foot is raised and the needle is in the up
position.
1. Raise the
KRUL]RQWDOVSRROSLQWRWKHYHUWLFDOSRVLWLRQ
Raise the
DX[LOLDU\VSRROSLQWRWKHYHUWLFDOSRVLWLRQ
6OLGHD
large spool cap and a felt pad on each one.
Place the thread spools on the spool caps.
%ULQJWKHWKUHDGRYHUDQGEHKLQGWKH
Pre-Tension
7KUHDGJXLGH$DQGXQGHUWKHWKUHDGJXLGH%
)ROORZWKH
thread slot and place the thread between
the
WKUHDGWHQVLRQGLVFV&0DNHVXUHWKDWRQHWKUHDG
is on each side of the tension discs.
3. Thread down through the right-hand threading slot
and then upwards through the left-hand threading slot.
%ULQJWKHWKUHDGVIURPWKHULJKWLQWRWKHWDNHXSOHYHU
'DQGGRZQLQWKHOHIWKDQGWKUHDGLQJVORW0DNH
sure that one thread is inside the needle thread guide
(DQGWKHRWKHURQHRXWVLGH$OVRPDNHVXUHWKDWWKH
threads do not become twisted together.
Note: The weight and irregular surface of specialty threads such as
metallic increases the amount of friction on the thread. By reducing
the tension, the risk of needle breakage and thread breakage is
reduced.
THREAD SENSOR
If the needle thread breaks or bobbin thread is running
low, the machine stops and a pop-up message appears on
the screen.
If needle thread breaks: Re-thread the machine and touch
2.RQWKHSRSXSPHVVDJH,I EREELQWKUHDGLVUXQQLQJ
ORZ<RXFDQFRQWLQXHVHZLQJZLWKRXWFORVLQJWKHSRSXS
EHIRUHWKHEREELQWKUHDGUXQVRXWFRPSOHWO\7KLVJLYHV
you an opportunity to plan when you want to change your
bobbin. When the bobbin is replaced with a full one, touch
2.LQWKHSRSXS