Husqvarna Royale, Руководство пользователя

Страница: 29 / 144

1
2
2:9
2 Set Up
PRESSER FOOT
CHANGING THE PRESSER FOOT
1. Make sure that the needle is in the highest position.
Pull the presser foot down and towards you.
2. Line up the cross pin on the foot with the gap in the
presser foot ankle.
3. Push the foot into the clip until the foot snaps into
place.
ATTACHING THE SENSOR Q-FOOT
8VLQJWKHVFUHZGULYHUUHPRYHWKHSUHVVHUIRRWDQNOH
3ODFHWKH6HQVRU4IRRWIURPEHKLQGDQGORZHU
the needle into the opening of the foot by turning
the handwheel towards you. Position the foot onto
the presser foot bar so that the hole on the foot
matches the hole on the presser foot bar. The arm
of the presser foot should rest on top of the needle
screw. Insert the screw and tighten the screw with a
VFUHZGULYHU
DUAL FEED WITH CHANGEABLE
PRESSER FEET
7KH'XDO)HHG)RRWZLWKFKDQJHDEOHSUHVVHUIHHWLV
GHVLJQHGWRIHHGOD\HUVRI IDEULFDQGRUEDWWLQJHYHQO\,WLV
SHUIHFWIRUTXLOWLQJVHZLQJYHOYHWVWUHWFKIDEULFVLPLWDWLRQ
leathers and fabrics that need precise pattern matching.
6QDSRQWKH&KDQJHDEOH6WUDLJKW6WLWFK)RRWZKHQXVLQJ
the straight stitch in the center needle position with a stitch
OHQJWKXSWRPP6QDSRQWKH&KDQJHDEOH=LJ]DJ)RRW
when selecting stitches up to 7mm wide and 6mm long.
A A
B C
D
Accessories Included
$ (GJH4XLOWLQJ*XLGHVOHIWDQGULJKW
% &KDQJHDEOH=LJ]DJ)RRW
& &KDQJHDEOH6WUDLJKW6WLWFK)RRW
' 'XDO)HHG