Husqvarna FE 250 AU 2014, Руководство по ремонту

Страница: 169 / 286

18 ENGINE
If there is damage or wear:
- Change the spring retainer.
- Check pretension ring
8
for damage and wear.
If there is damage or wear:
- Change the pretension ring.
- Check spring washer
0
for damage and wear.
If there is damage or wear:
- Change the spring washer.
- Check the thrust face of pressure cap
(D
for damage and wear.
If there is damage or wear:
- Change the pressure cap.
- Check clutch center @ for damage and wear.
If there is damage or wear:
- Change the clutch center.
- Check damping rubber pieces
C,
for damage and wear.
If there is damage or wear:
- Change the damping rubber pieces.
- Check the inner clutch hub Q) for damage and wear.
If there is damage or wear:
- Change the inner clutch hub.
- Check the thrust surfaces of the clutch facing discs in clutch basket
4D
for damage and wear.
If there is damage or wear:
- Change the clutch facing disks and the clutch basket.
- Check needle bearing
48
and collar sleeve
«8
for damage and wear.
If there is damage or wear:
- Change the needle bearing and collar sleeve.
- Check the intermediate clutch disks
41)
for damage and wear.
If the intermediate clutch disks are not even or exhibit pitting:
- Change all intermediate clutch disks.
- Check clutch facing discs
4D
for discoloration and scoring.
If there is discoloration or scoring:
- Change all clutch facing disks.
- Check the thickness of clutch facing discs
4D.
I
Clutch facing discs - thickness of total package
If the clutch facing disk does not meet specifications:
- Change all clutch facing disks.
I ;:,: 26.4 mm (;:>: 1.039 in)
167