Husqvarna FE 250 AU 2014, Руководство по ремонту

Страница: 173 / 286

18 ENGINE
-
Check needle bearings
O
for damage and wear.
If there is damage or wear:
-
Change the needle bearings.
306578-10
-
Check the pivot points of main shaft
8
and countershaft
@)
for damage and wear.
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the tooth profiles of main shaft
8
and countershaft
8
for damage and wear.
If there is damage or wear:
-
Change the main shaft and/or countershaft.
-
Check the pivot points of idler gears
8
for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the shift dogs of idler gears
8
and sliding gears
@)
for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth faces of idler gears
8,
sliding gears
@)
and fixed gear
C)
for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check the tooth profiles of sliding gears
0
for damage and wear.
If there is damage or wear:
-
Change the gear wheel pair.
-
Check sliding gears
0
for smooth operation in the profile of main shaft
8.
If the sliding gear does not move freely:
-
Change the sliding gear or the main shaft.
-
Check sliding gears
0
for smooth operation in the profile of countershaft
C,.
If the sliding gear does not move freely:
-
Change the sliding gear or the countershaft.
-
Check stop disks @ for damage and wear.
If there is damage or wear:
-
Change the stop disks.
-
Use new lock rings
C,
with every repair.
18.4.40 Assembling the main shaft
Info
Use new lock rings with every repair.
171