Husqvarna F2275U4, Руководство пользователя

Страница: 132 / 162

18 SERVICE WORK ON THE ENGINE
130
Info
Drain the engine oil with the engine at operating temperature.
Preparatory work
–
Park the motorcycle on a level surface.
–
Remove the engine guard. ( p. 87)
V01393-10
Main work
–
Position an appropriate container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.
Info
Do not remove screws
2
.
V01394-10
–
Remove screw plug
3
with oil screen
4
and the O-rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
V01395-10
–
Position oil screen
4
with the O-rings on a pin wrench.
–
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
V01396-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil
screen M20x1.5 15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a
new seal ring.
Guideline
Oil drain plug with
magnet M12x1.5 20 Nm (14.8 lbf ft)