Husqvarna F1303V1, Руководство пользователя

Страница: 83 / 140

WHEELS, TIRES 14
81
F01414-10
–
Remove spacers
6
.
14.4 Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
Main work
–
Check the rear hub damping rubber pieces. ( p. 83)
E01131-10
(Option: Wire spoked wheels)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
1
and contact sur-
faces
A
of the spacers.
Long-life grease ( p. 130)
–
Clean the thread of the wheel spindle and axle nut.
–
Clean and lightly grease the wheel spindle.
Long-life grease ( p. 130)
–
Clean the contact areas on the brake caliper bracket and
link fork.
–
Mount the damping rubber pieces and rear sprocket car-
rier on the rear wheel.
–
Insert the narrow spacer into the side of the rear
sprocket.
–
Insert the wide spacer into the side of the brake disc.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.