Husqvarna F1303V1, Руководство пользователя

Страница: 106 / 140

16 COOLING SYSTEM
104
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Preparatory work
–
Remove the seat. ( p. 55)
–
Remove the right side cover. ( p. 58)
E01307-10
Main work
–
Position the motorcycle upright.
–
Position an appropriate container under the engine.
–
Remove screw
1
with the seal ring.
E01305-10
–
Remove radiator cap
2
.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug, water
pump drain hole
M6 10 Nm (7.4 lbf ft)
E01115-11
–
Loosen bleeder screw
3
.
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant ( p. 128)
–
Completely fill the radiator with coolant.
–
Mount the radiator cap.
–
Rest the vehicle on the side stand.