Husqvarna DS 700, Руководство оператора

Страница: 2 / 24

CONTENTS and INTRODUCTION
Contents
Section Page
Contents & Introduction................................................. 2
Symbols and Decals.....................................................3-5
Safety Instructions........................................................6-9
Parts Identification (What Is What)...............................10
Features.......................................................................... 11
Machine Set-Up........................................................ 12-16
Diamond Core Bit Installation...................................... 17
Operation ................................................................. 18-20
Maintenance .................................................................. 21
Trouble Shooting........................................................... 22
Accessories................................................................... 23
Contact Information.......................................................23
Introduction
Thank you for purchasing your new machine from
Husqvarna Construction Products. We have provided
important safety messages in this manual and on the ma-
chine. Please read these messages carefully. A safety
message alerts you to potential hazards that could hurt
you or others. Each safety message is preceded by a
symbol or the safety alert symbol ( ) and one of two
words, WARNING, or CAUTION.
These signal words mean:
WARNING
: Indicates a hazardous situation which,
if not avoided COULD result in death or serious injury.
CAUTION
:
Indicates a hazardous situation,
which, if not avoided, COULD result in minor or moder-
ate injury. It may also be used to alert against unsafe
practices.
Each message tells you what the hazard is, what can
happen, and what you can do to avoid or reduce injury.
Other important messages are preceded by the word
NOTICE .
NOTICE
means:
NOTICE :
Indicates a hazardous situation which, if not
avoided, could result in property damage. Your ma-
chine or other property can be damaged if you don’t
follow this instruction.
The safety labels should be periodically inspected and
cleaned by the user to maintain good legibility at a safe
viewing distance. If the label is worn, damaged, or is
illegible, it should be replaced.
WARNING!
Before operating machine, read and
understand this entire operation manual &
operation manual supplied with the power
source.
Be familiar with machine before operation!
EVERY MACHINE IS THOROUGHLY TEST-
ED BEFORE LEAVING THE FACTORY.
EACH MACHINE IS SUPPLIED WITH A
COPY OF THIS MANUAL. OPERATORS
OF THIS EQUIPMENT MUST READ AND
BE FAMILIAR WITH THE SAFETY WARN-
INGS. FAILURE TO OBEY WARNINGS MAY
RESULT IN INJURY OR DEATH. FOLLOW
INSTRUCTIONS STRICTLY TO ENSURE
LONG SERVICE IN NORMAL OPERATION.
It is the owner’s responsibility to ensure that
all operators of this machine have read and
understand the content of this manual before
using the product! Careless or improper use
of this machine can cause serious or even
fatal injury! Allow only competent adults to
operate this machine!