Husqvarna BS 110, Руководство оператора, Страница: 9 / 120

9. Adjust the handle to an applicable operation position.
Refer to To adjust the handle height on page 9
and
To adjust the adjustable handle on page 9
.
10. Make sure that the drive wheels are engaged. Refer
to To engage and disengage the drive wheels on
page 21
.
11. Install a blade. Refer to To select the correct blade
dimension and installation position on page 9
.
WARNING:
Use protective gloves.
The blades are very sharp.
12. Make sure that the blade is sharp. If it is necessary,
replace or sharpen the blade. Refer to To replace
the blade on page 17
and
To sharpen the blade on
page 17
.
13. If you use a self-scoring blade, make sure that the
angles at the ends of the blade (A) are sharp.
A
14. Make sure that the start/stop and function selection
switch is in the "0" position.
15. Connect the product to a power supply. Refer to
To
connect the product to a power supply on page 10 .
To adjust the handle height
1. Loosen the handle adjustment knob.
2. Move the handle to an applicable position.
3. Tighten the handle adjustment knob.
To adjust the adjustable handle
1. Loosen the clamp lever.
2. Move the adjustable handle to an applicable
position.
3. Tighten the clamp lever.
To select the correct blade dimension
and installation position
WARNING:
Use protective gloves. The
blades are very sharp.
1804 - 001 - 06.05.2022 9