Husqvarna BS 110, Руководство оператора, Страница: 13 / 120

2. Install a short blade of the correct type. Refer to
To
select the correct blade dimension and installation
position on page 9
and
To replace the blade on page
17 .
WARNING:
Use protective gloves.
The blades are very sharp.
3. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to
To sharpen the
blade on page 17
.
4. Cut linear ditches in the floor. Make sure that the
distance between the ditches is the same as the
width of the long blade.
5. Install a long blade of the correct type. Refer to
To
select the correct blade dimension and installation
position on page 9
and
To replace the blade on page
17
.
6. Make sure that the blade is sharp. Sharpen the
blade if it is necessary. Refer to To sharpen the
blade on page 17
.
7. Remove the floor between the ditches.
Note:
Use a chisel and move the product in a fan
shape pattern to remove tiles and floors made of
wood.
Blade applications
Floor type Blade application
VCT – Tile (Vinyl Composition
Tile)
Do not use a blade wider than the dimension of the tile being removed. If the tiles do
not come up clean or the machine jumps on top of the tiles, install a smaller blade
until proper blade size is found or use a smaller portion of the blade.
1804 - 001 - 06.05.2022 13